Glossy Polyurethane Parquet Varnish

Descripción:

One-component polyurethane varnish for wood subjected to strong abrasion. Glossy and flexible finish. Excellent brushability and good leveling.

Aplicación:

Varnishing of interior wood constantly subjected to abrasion, such as parquet, cork floors, stairs, railings, ceiling panels, etc.

Modo de empleo:

- NEW WOOD:

Sand thoroughly, clean and apply a very diluted first coat. You can reach a dilution of one part of varnish with two of Jafep Polyurethane Solvent. Allow a minimum of 5 hours and a maximum of 24 hours to pass, to apply subsequent layers, after smooth sanding. These topcoats can also be thinned 20-25% with Jafep Polyurethane Thinner.

- VARNISHED WOOD:

Check its compatibility if possible: sand smoothly and varnish. If the varnishes are not compatible or are poorly adhered, they will be completely removed and proceed as on new wood.

Cleaning utensils with polyurethane or xylene solvent.

Características técnicas: