Alkyd Gloss Enamel
This is a high gloss synthetic enamel which has excellent coverage, formulated using special alkyd resins and pigments containing contrasting resistance and stability to light, which gives optimum quality finishes.
It is a product developed with the technique "high solids", that's why it is recommended to apply thin coats and to respect the drying and recoatable times in order to get the best benefits.
Iron, Steel, Wood, Plaster, etc.
It is a high quality synthetic gloss enamel, which covers the needs of the professional painter and housewife, being extremely suitable for decorating and protecting surfaces made of iron, steel, wood, plaster, etc., such as: doors, chairs, tables, windows, radiators, railings, metal structures, machinery, boats, etc.
The practical spreading rate will depend on the actual dry film thickness, the nature of
the substrate and the application method.
Modo de empleo:
Stir the content of the packaging. Apply by brush or roller with the original viscosity. If it is applied by spray gun, adjust viscosity with the suitable solvents. If the surface is already pained, scraped and clean in order to ensure the adhesion to these previous coats.
When applying to wood and plaster, the surface should be prepared beforehand using a suitable sealer, such as : Selladora Sintética (Alkyd Sealer) or Multiusos al agua (Water-based multipurpose primer)
When applying to iron and steel, the surface should be protected beforehand using Imprimación Antioxidante (Anticorrosive primer) or Minio de Plomo (Red Lead). On galvanised steel and alloys, duly prime beforehand.
As it is a high solid product, in interior use, it could be enough with just one coat of enamel. In exterior use, it is recommendable to finish with 2 or 3 coats.
|Color||Depending on colour chart|
|Peso específico||between 0,95gr./ cm3 and 1,25 gr./cm3 depending on colour.|
|Rendimiento||12 - 14 m2/litre depending on the state of the surface.|
|Secado||4 - 6 hours|