RUST CONVERTER / NEUTRALISER
Descripción:
Aqueous preparation that neutralises the rusting process on metal surfaces as a result of a chemical reaction that transforms the iron oxide into a complex black metal.
Aplicación:
Brush, wool roller or spray (adjusting density)
Modo de empleo:
The product must be applied onto rusted surfaces.
Clean to remove oil and grease and then remove the loose particles with a brush. Apply just one thin coat. It is best to use a brush to facilitate penetration although a roller or spray can also be used.
The reaction time is approximately 3 hours after which the treated surface goes a black/blue colour and is then ready to be painted.
This product is not a paint, and as a result you should not leave it for more than 48 hours without applying a suitable paint.
Características técnicas:
Color | White - yellowish |
Naturaleza | Water based synthetic polymer |
Peso específico | 1.02 gr./cm2 |
Rendimiento | Up to 15 m2/litre depending on surface |
Secado | 3 hours approximately |